{"product_id":"splash-waxoil-undersealing-rust-penetrant-stabiliser-1000ml","title":"Splash Waxoil \/ Undersealing rust penetrant stabiliser 1000ml","description":"\u003cdiv class=\"rm-buzzweld-product-description\"\u003e\n\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n\n  \u003ch3 class=\"rm-heading-bg1\"\u003eOverview\u003c\/h3\u003e\n  \u003cp\u003eSplash is a fast-acting dewatering rust penetrant and stabiliser designed to be used before your main underbody coating. Applied directly to corrosion like a rust converter but without the chemical limitations, Splash pushes moisture and air out of existing rust, cancels the corrosion cells responsible for further rust formation, and creates the ideal surface for a top coat of Chassis Guard or any traditional lanolin, wax, or bitumen-based coating.\u003c\/p\u003e\n  \u003cp\u003eUnlike conventional rust converters, Splash penetrates deep into corrosion rather than sitting on top of it — making it effective even on wet rust, immediately after washing. One litre is sufficient to treat most vehicles and 4x4s.\u003c\/p\u003e\n  \u003cp\u003eFor optimal application, ensure the product is at room temperature (15–20°C) before use.\u003c\/p\u003e\n\n  \u003ch3 class=\"rm-heading-bg1\"\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eActive dewatering — pushes moisture out of existing corrosion and damp surfaces\u003c\/li\u003e\n    \u003cli\u003eHigher penetration into corrosion than Chassis Guard — effective even on dry corrosion\u003c\/li\u003e\n    \u003cli\u003eCancels active corrosion cells to stop further rust formation\u003c\/li\u003e\n    \u003cli\u003eWorks on wet rust, bare steel, and existing painted surfaces\u003c\/li\u003e\n    \u003cli\u003eThe perfect primer coat for Chassis Guard and all lanolin, wax, and bitumen-based coatings\u003c\/li\u003e\n    \u003cli\u003eHydrophobic formula sheds water — not sticky\u003c\/li\u003e\n    \u003cli\u003eDrives heavy corrosion from base steel over time\u003c\/li\u003e\n    \u003cli\u003eExcellent cavity treatment with strong rust penetration and creep\u003c\/li\u003e\n    \u003cli\u003eClear coating allows full visual inspection of the substrate\u003c\/li\u003e\n    \u003cli\u003eUltra low VOC with minimised harmful emissions\u003c\/li\u003e\n    \u003cli\u003eNon-toxic and fully biodegradable\u003c\/li\u003e\n    \u003cli\u003eEasy to remove\u003c\/li\u003e\n    \u003cli\u003eCost-effective short-term protection by itself — typically 1–2 months standalone\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3 class=\"rm-heading-bg1\"\u003eThings to Consider\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eClear only — no coloured version planned\u003c\/li\u003e\n    \u003cli\u003eNot a standalone long-term treatment — best results achieved when top-coated with Chassis Guard\u003c\/li\u003e\n    \u003cli\u003eChassis Guard does not require Splash as a primer, but Splash is strongly recommended on damp or wet corrosion for best effectiveness\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3 class=\"rm-heading-bg1\"\u003eApplication Instructions\u003c\/h3\u003e\n  \u003col\u003e\n    \u003cli\u003eRemove any mud and loose contamination from the surface\u003c\/li\u003e\n    \u003cli\u003eLarge rust delamination can be removed to improve penetration, or left in place — if treating heavy rust, inspect and top up more frequently while Splash drives corrosion back to bare metal over time\u003c\/li\u003e\n    \u003cli\u003eApply Splash liberally to damp or wet areas — it will actively drive off moisture in beads as it cures\u003c\/li\u003e\n    \u003cli\u003eAllow Splash to cure fully dry before applying your top coat\u003c\/li\u003e\n    \u003cli\u003eTop coat with Chassis Guard as per normal application instructions\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch3 class=\"rm-heading-bg1\"\u003eCoverage Guide\u003c\/h3\u003e\n  \u003cp\u003eWe generally recommend a 1:2 ratio of Splash to Chassis Guard — one part Splash for every two parts Chassis Guard. Splash covers slightly better and is not typically needed across every surface. A 1:1 ratio is perfectly fine if you prefer to be as thorough as possible.\u003c\/p\u003e\n\n  \u003ch3 class=\"rm-heading-bg1\"\u003eTechnical Information\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eVolume: 1000ml\u003c\/li\u003e\n    \u003cli\u003eColour: Clear\u003c\/li\u003e\n    \u003cli\u003eVOC content: Ultra low\u003c\/li\u003e\n    \u003cli\u003eStandalone protection: Approximately 1–2 months\u003c\/li\u003e\n    \u003cli\u003eBiodegradable formula; bottles are produced using PCR (post-consumer recycled) materials\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3 class=\"rm-heading-bg1\"\u003eRelated Products\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eChassis Guard\u003c\/strong\u003e — Recommended top coat after Splash for long-term underbody protection\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eChassis Guard Pro\u003c\/strong\u003e — Premium top coat option with ceramic infusion and VPI technology\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eChassis Guard Pro Ultimate Rustproofing Kit\u003c\/strong\u003e — Includes Splash and Chassis Guard Pro in a complete treatment kit\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Buzzweld","offers":[{"title":"Default Title","offer_id":57509358535040,"sku":"SCBW141","price":31.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/7157\/3310\/files\/Splash_Waxoil_Undersealing_rust_penetrant_stabiliser_1000ml_buzzweld.jpg?v=1772467718","url":"https:\/\/shielderchassis.com\/products\/splash-waxoil-undersealing-rust-penetrant-stabiliser-1000ml","provider":"ShielderChassis","version":"1.0","type":"link"}